Lighting for streets to buy street lamps, the price

Designing the most efficient and cost-effective LED lighting range was the driving force behind the development of the AMPERA family. With its long lifespan, easy installation, limited maintenance requirements and resistance to high temperatures, the AMPERA road lighting solution enables you to maximise your return on investment. Available in 3 sizes, AMPERA improves safety for drivers, cyclists and pedestrians and meets all your road and urban lighting needs, from roads and motorways, urban and residential streets, bike and pedestrian paths, squares and pedestrian areas, car parks to bridges, large areas and even railway stations and metros. The AMPERA range sets a new benchmark in outdoor LED lighting with performing and flexible solutions that lead to the shortest payback time while being connected-ready for your future Smart City requirements.

Urban & residential streets

Bridges

Railway stations & metros

Car parks

Squares & pedestrian areas

Mounting possibilities

Post-top slip-over – Ø60mm
Post-top slip-over – Ø76mm
Side-entry slip-over – Ø76mm
Side-entry slip-over – Ø42mm
Side-entry slip-over – Ø48mm
Post-top slip-over – Ø48mm
Post-top slip-over – Ø42mm
Side-entry slip-over – Ø60mm
Weight (kg | lbs)

AMPERA MINI - 7.8 | 17.2
AMPERA MIDI - 11.5 | 25.3
AMPERA MAXI - 18.2 | 40.0
Dimensions and mounting AxBxC (mm | inch)

AMPERA MINI - 583x90x340 | 23.0x3.5x13.4
AMPERA MIDI - 674x132x436 | 26.5x5.2x17.2
AMPERA MAXI - 900x135x438 | 35.4x5.3x17.2
Operating temperature range (Ta)

-40 °C up to +55 °C
-40 ° F up to 131 °F
Lifetime

100,000h - L90
Impact resistance

IK 09
Tightness level

IP 66
Protector

Tempered glass
Оптика

PMMA
Housing

Aluminium
Upward Light Output Ratio (ULOR)

0
Colour rendering index (CRI)

70
80
LED colour temperature

Cool White 757
Neutral White 740
Warm White 727
Warm White 730
Warm White 830
Sensor(s)

PIR (optional)
Связанные системы управления

Schréder EXEDRA
Owlet Nightshift
Owlet IoT
Socket option(s)

NEMA 7-pin (optional)
Optional Zhaga socket - Zhaga-D4i certified product
Control option(s)

Дуальна потужність
Фотоелемент
AmpDim
Користувацький профіль дімування
Дистанційне керування
Control protocol(s)

Bluetooth
1-10V
DALI
Surge protection (kV)

10
Power factor (at full load)

0.90
Nominal voltage

220-240V – 50-60Hz
Electrical class

Class I EU
Class II EU
Luminaire efficacy - up to (lm/W)

161
Power consumption (W)

10.3 - 310
Luminaire output flux (lm)

800 - 41200
Compliance

CE mark
Zhaga-D4i certified
ENEC certified
Recommanded installation height (m)

4 – 12

Control options

Control options for AMPERA
The following dimming options are possible for the AMPERA outdoor LED luminaires:
• Custom dimming profile
• 1 - 10V
• DALI
• AMPDIM
• Remote management by 1-10V or DALI
• Bi-Power
• Bluetooth
As an option, the AMPERA street luminaire can be equipped with a 7-pin NEMA socket to be connected-ready for your future Smart City requirements. The Owlet IoT control system remotely manages luminaires in a lighting network.
This creates opportunities for improved efficiency and enables you to receive accurate real-time data, allowing you to plan, monitor and control outdoor lighting networks.
Installation and Maintenance
Standard mounting
The complete range is available with three different universal fixation parts adapted for post-top and side-entry mountings on various spigot diameters (Ø32mm with adapter, Ø42- 48mm, Ø60mm and Ø76mm). The inclination angle can be adjusted on-site by 15° for both post-top and side-entry configurations.
AMPERA Mini & Midi
Once the spigot is installed on the pole, the body of the AMPERA Mini and Midi can be mounted on the spigot, and then connected. The canopy is easily attached to the body with two latches.
AMPERA Maxi
As the AMPERA Maxi is available with the fixation already pre‐assembled, the fixation simply needs to be tightened.